ProAc Response DB3

2.850 €

Eben- oder Rosenholzfinish 600 € Aufpreis

 

Small high quality loudspeakers have become very popular, being less of an eyesore whilst reproducing some quite respectable sound quality. The new Response DB3 has a similar cabinet size to the Response DB1. There are structural and visual differences to the cabinet of the Response DB3, it also employs a new bass driver and crossover which have been chosen for their exceptional performance with a more affordable price.

The new Response DB3 has a wonderfully rich and extended bass quality, loaded with a single reflex port in the rear of the cabinet. The tweeter is our ProAc one inch soft dome used in many other ProAc designs. This one inch silk dome has a superbly flat response with electrostatic type detail and sweetness to its qualities.

A newly designed bass driver with a special surround and dust cap, allows extra information from the voice coil giving a smoother transition of frequencies to our one inch dome tweeter. The bass driver is a long throw design with a raised spider and linear motor system. The new bass driver is responsible for the remarkable bass extension.

Kategorie: Product ID: 314

Beschreibung

Specifications

Nominal Impedance
8 ohms
Recommended Amplifiers
20 to 100 watts
Frequency Response
38Hz to 30kHz
Sensitivity
88.5 db linear for 1 watt at 1 metre
Bass/Midrange
ProAc 5 inch long throw unit with mikapulp cone and transparent dust cap.
Tweeter
ProAc 1 inch silk dome with special coolant.
Crossover
Finest components on dedicated circuit board. Multistrand oxygen free copper cable throughout. Split for optional Bi wiring or Bi amplification
Dimensions
12.5″ (320mm) high, 7.28″ (182mm) wide, 10.4″ (280mm)
Weight
19.6lbs (8.8 Kgs) each
Mode
Stand mounted
Grille
Acoustically transparent crimplene
Finish
Standard Finishes:
Black Ash, Mahogany, Cherry, Maple, Oak, Silk White.
Premium Finishes:
Rosewood, Ebony.
*Premium Finishes to order at extra cost*